Product news

Current page :

Home / News / Product news /

How do enterprises choose office furniture

May 17,2024

admin

 

As soon as you walk into the office furniture store, the dazzling array of office furniture must be dazzling. Before buying office furniture, do you know how to choose office furniture? What should you pay attention to when buying office furniture?
 

1: The material of office furniture should be environmentally friendly
 

In terms of material, office furniture can be divided into: solid wood office furniture, panel office furniture, steel office furniture, plastic office furniture, fabric office furniture, rattan office furniture, etc. No matter what kind of office furniture it is, the primary guarantee must be health. When purchasing office furniture, you can check the relevant quality inspection report to ensure that the office furniture you buy is healthy and environmentally friendly.
 

2: the smell of office furniture should not be irritating
 

Environmentally friendly custom office furniture products should have no irritating odor and do not irritate the eyes, nose and throat. If you smell office furniture and find that the smell is irritating, you need to pay attention. The heavier the pungent odor, the higher the formaldehyde content may be. However, some office furniture is still substandard even if the taste is not heavy. Therefore, before purchasing, be sure to ask the office furniture manufacturer to show the relevant environmental protection certificate.

 

office furniture manufacturers
 

3: Office furniture paint should be smooth
 

After smelling the smell, you also need to take a closer look at the paint. Paint is also closely related to the health of the human body. You need to touch it with your hand, you need to pay attention to whether the paint is smooth, whether the paint is wrinkled, whether there is paint peeling. Generally, the office furniture of regular office furniture manufacturers is very sophisticated in terms of paint.
 

4: Office furniture should be flat on all four feet
 

Whether you are buying an office furniture sofa or a filing cabinet, the flatness of the four feet of the office furniture is a must and a prerequisite. When looking at office furniture, you can give it a shake, or sit on it and try it out. If there is a sound, pay attention, such office furniture may not be strong.

 

 

office furniture manufacturers


 

5: The water content of office furniture is the same as the local
 

Because the moisture content of office furniture wood is affected by its origin, and office furniture with a moisture content higher than 1% of the average moisture content in the area of ​​use will appear cracking, deformation, falling apart, warping and other phenomena, so it is best to buy dry The office furniture produced by the office furniture manufacturers with good craftsmanship is not important whether it is produced locally or in other places. The key is that its moisture content should be consistent with the average moisture content of the area where it is used.
 

6: whether the edge of office furniture is flat
 

If the sealing edge is uneven, it means that the inner material is wet, and the sealing edge will fall off in a few days. The edge should also be rounded, not straight edges and right angles. Edges sealed with wooden strips are prone to moisture or cracking. For office furniture inlaid with plywood, the strips are nailed with nails. Pay attention to whether the nail holes are flat and whether the color of the nail holes is the same as that of other places.
 

Usually the nail holes are sealed with putty. Pay attention to whether the putty is bulging. If it is bulging, it means no, and the putty will gradually fall out from the inside. Whether the edge banding is flat is also an important factor to investigate an office furniture manufacturer. Small office furniture manufacturers with poor quality use manual edge banding. If the quality of the plate is still too poor with precision sawing, the plate edge has a gap, and special attention should be paid when purchasing.
 

Ekintop office furniture manufacturers have always been attentive to tailor-made office space solutions that meet their own needs for the majority of enterprises. If you want to know more, please contact us.
 

< Previous Next >

Leave us a message

Upload 2D/3D drawings

Upload Your Files or Contact summerhu@esun-kintop.com to Get Instant Quote (Please attach 2D CAD drawings and 3D CAD models in any format including STEP, IGES, DWG, PDF, STL, ZIP, etc. Number of files: 1).

Upload files
max file size: 20MB
>> Drag slider validation

Guangdong Esun Furniture Technology Company Limited

  • Summer:
  • Tel:
    +8618925958288(Vicky)
  • Address:
    Building 2-3, No. 24, Third Industrial Zone, Lecong Community Residents Committee, Lecong Town, Shunde District, Foshan,Guangdong, China

GET A QUOTE

Contact us

Building 2-3, No. 24, Third Industrial Zone, Lecong Community Residents Committee, Lecong Town, Shunde District, Foshan,Guangdong, China
+8618925958288(Vicky)
008618923207957
Support: Magic Lamp
Inquirly Now
Send an Email
Contact Us
loading
Technical Support: Magic Lamp